Kanal VarnaDrains • Leaks • Thermal imaging • Plumbing
Water spraying from a burst pipe

Burst pipe in Varna: what to do now and how the repair works

Water pouring from a pipe is one of the most stressful things that can happen in a home. Shut the water off, switch off the power to the wet area and call us. Burst-pipe repairs in and around Varna are done by the plumbers we work with, every day from 06:00 to 23:00, and we tell you when we can come.

Our clients on video · all videos (in Bulgarian)

From €30Emergency call-out with diagnosis; fixing a leak from €40
Stop it firstStop tap, power off, buckets, warn the neighbours below
06:00–23:00Every day, holidays included
Pay after the jobCash, card or bank transfer; invoice on request
1000+ clients served 30+ years in the trade Price agreed before we start 06:00–23:00 every day
In short

If you have a burst pipe in Varna, shut the stop tap, switch off the power in the wet area, put out buckets and towels and warn the neighbours below. Then call or write to us: burst-pipe repairs are done by the plumbers we work with, every day from 06:00 to 23:00, and we tell you when we can come. An emergency call-out with diagnosis is from €30 and fixing a leak from €40; the price of a bigger repair we tell you before we start. For a leak inside a wall or floor we use a thermal camera to locate it with as little breaking up as possible. Call +359 52 993 333 or email info@kanalvarna.com — write to us in English and we reply in English. If the pipe has frozen, see frozen pipes; other emergencies are on our emergency plumber page.

Updated November 2026

Burst pipe: what to do right now

A pipe under pressure can flood a room quickly, and the water can reach the floor, walls, furniture and the electrics. Before we come, do the following:

  • Shut the stop tap. Usually in the bathroom or kitchen, by the water meter or in the cellar. If the pipe is a shared riser, call the building manager.
  • Switch off the power in the affected area — water and electricity are a dangerous mix.
  • Put out buckets, bowls and towels to limit the flood.
  • Warn the neighbours below — the water may already be going through to them.
  • Photograph the spot and the wet walls before you wipe up. You will want the photos for your insurer — see leak report for insurance.
  • Then call or write to us. We tell you when we can come.

If the flat is empty and you are abroad, ask a neighbour, the building manager or your property manager to do the first three steps, and send us the address with the name and phone number of whoever can open the door.

How to stop the leak temporarily until the plumber comes

The aim is to stop the water, not to repair. If the leak is after an angle valve, closing that valve is enough; otherwise close your flat's stop tap.

  • The valve just before the appliance. Under the sink, at the cistern and beside the washing machine are small valves. If the leak is after them, close only those and the rest of the flat keeps its water.
  • The flat's stop tap, usually next to the water meter. If it will not turn, do not force it with a spanner: old taps break exactly then. Try the next tap towards the riser.
  • The leak is before your stop tap — on the riser or before the meter — and cannot be stopped from the flat. Call the building manager; in a house, close the tap in the meter chamber.
  • Afterwards open the lowest tap in the flat briefly to relieve the pressure. If you will also drain the hot water, switch off the water heater first.
  • A heating pipe: with a gas or electric boiler, switch the boiler off and close the valves before and after the leaking part; for a radiator, both radiator valves. With a solid-fuel boiler, do not close the valves between it and the system, as it keeps heating and can overheat: add no more fuel and let the fire burn out. Heating water is hot and under pressure, so do not wrap it until the system has cooled.

A temporary wrap makes sense only if the stop tap does not hold completely or you must turn the water on for a few hours. A repair clamp with a rubber seal, tightened exactly over the crack, holds on metal pipes under pressure. Self-amalgamating tape is wound stretched and overlapped. Epoxy putty holds only on a dry, cleaned pipe with no pressure. Tape and epoxy last hours or days; the clamp lasts longer, but even after it the damaged section is replaced.

What we do: types of repair

The plumbers we work with choose the repair according to the damage:

  • Soldering for small cracks in copper pipe.
  • A clamp as a temporary fix for metal pipes, allowing normal use until planned replacement.
  • A PPR insert: the damaged piece is cut out and a PPR length is fitted with transition fittings.
  • Full replacement of a section where the pipe is badly corroded and a spot repair would be risky.
  1. You call or write. You describe the situation and we tell you what to do meanwhile and when we can come.
  2. Stopping the leak. The plumber closes the water, assesses the damage and decides the type of repair.
  3. Repair. Soldering, clamp or PPR insert, according to the situation.
  4. Check. A test, the water switched on again and every joint checked.

The price depends on the type of repair and on how accessible the pipe is; for a larger repair, such as replacing a section, we tell you the price before we start.

A hidden burst pipe in a wall or under the floor

Sometimes the pipe splits inside a wall or under a floor and there is no fountain to see. The signs are a wet patch that keeps growing, falling pressure and a higher water bill. For these we use a thermal camera to locate the leak accurately, with as little breaking up as possible. The plumbers we work with also use acoustic equipment for finding leaks. If you are not sure whether the water is coming from a pipe, check the water meter with every tap closed: if it still turns, there is a leak after the meter. See thermal imaging leak detection for how the camera is used.

Shut the stop tap, switch off the power and write or call — we tell you when we can come and the price before we start.

📞 +359 52 993 333

How to recognise a burst pipe in time

  • Wet patches on walls or ceiling: dark stains, blistered paint or flaking plaster. If the patch grows or returns after drying, a leak is active.
  • An unexplained high water bill.
  • The sound of running water in the walls with every tap closed.
  • Mould and a damp smell that persists.
  • Reduced pressure when the water company reports no fault, which suggests a burst pipe in your own pipes.

If the water has already soaked walls or floor, see drying out after a leak.

Why pipes burst, and how to prevent the next one

  • Corrosion, the commonest cause with metal pipes. Rust thins the wall until it gives.
  • Freezing. Water expands when it freezes and can split a pipe. Pipes in cellars, lofts, balconies and garages are at risk.
  • Water hammer: the shock when flow is suddenly stopped, for example by closing a tap fast.
  • Mechanical damage, such as drilling into a pipe.
  • High pressure above about 6 bar strains joints and pipes. See pressure reducing valve.
  • A faulty pipe or fitting, rarely.

The lasting answer for old steel pipes is replacement with PPR or PEX, not only a spot repair; see pipe replacement. A repair of an old pipe can fail again nearby, so we recommend planned replacement. If the budget does not allow it, an automatic shut-off valve in front of each appliance (washing machine, dishwasher, water heater) cuts the flood risk. If the property stands empty for a long time, close the main stop tap before you leave, so that only the water left in the pipes can escape.

Burst pipe and your insurer

Most home insurance covers water damage, but the terms depend on your policy. Tell the insurer promptly, photograph the damage before the repair, and keep the invoice. We give a detailed invoice describing the work, which you can show to your insurer. If a neighbour's flat is damaged, see leak from the flat above.

If you are not in Bulgaria

A tenant or neighbour phones you about water in the flat. You do not need to be in Varna. Ask them to shut the stop tap and switch off the power, and send us the address, a photo of where the water is coming from and the name and phone number of whoever can open the door. We arrange the visit with them and tell you the price first; you can pay by bank transfer after the work.

Frequently asked questions

How much does an emergency burst-pipe repair cost?

An emergency call-out with diagnosis is from €30 and fixing a leak from €40. A larger repair, such as replacing a section, we price before we start, once we have seen it. See our price list.

How quickly can you come?

We tell you when we can come on the phone, or in our reply to your email. We work every day from 06:00 to 23:00, including holidays and weekends.

Can the pipe burst again?

After a spot repair of an old pipe it is possible. We recommend planned replacement of the old pipework rather than only repairing the point that failed.

Can a pipe be repaired without breaking the wall?

In some cases yes: where a section is accessible, a local repair with a coupling or clamp is possible. For a hidden pipe it is sometimes more practical to run a new pipe on the surface than to break out a whole wall. We assess each case individually.

Can tape, a clamp or epoxy stay as a permanent repair?

Tape and epoxy cannot; they only stop the water until the repair. A repair clamp fitted correctly on a sound, accessible section may stay longer, but an old metal pipe is rarely weak in one place only, so we also check the neighbouring joints and usually recommend replacing the section.

I'm not in Bulgaria — can you still deal with it?

Yes. Send us the address, a photo and the contact of whoever can open the door. We arrange the visit with them, agree the price with you first, and you can pay by bank transfer. You can write to us in English and we reply in English.

Burst pipe?

Shut the stop tap, switch off the power and write or call — we tell you when we can come and the price before we start.

📞 +359 52 993 333

or email info@kanalvarna.com — write in English and we reply in English.

Send us a message

Leave your name and a phone number with the country code. Add your email if you prefer a written reply — write in English and we reply in English. We confirm the price before any work starts.

📞