Thermal imaging leak detection in Varna: finding a hidden leak without opening up walls
A damp patch, a wet wall or a bill that does not add up, and no sign of where the water comes from? A thermal camera shows the cooler or warmer zone where water sits behind the surface, so we know where to measure before anyone picks up a hammer. Every day from 06:00 to 23:00 in Varna and along the coast.
Our clients on video · all videos (in Bulgarian)
Thermal imaging leak detection in Varna means we scan walls, floors and ceilings with an infrared camera, look for the temperature difference that water leaves behind, and confirm the spot with a moisture meter — without breaking anything open. It costs €52 for the first flat and €26 for each further flat; combined diagnostics, where the camera is joined by a listening device and a moisture meter, are from €55. We work every day from 06:00 to 23:00. Call +359 52 993 333 or email info@kanalvarna.com — write to us in English and we reply in English. This page is about the camera method; the full range of methods is on the leak detection in Varna page.
Updated November 2026What thermal imaging leak detection actually shows
A thermal camera does not see water. It sees surface temperature. Water that has soaked into plaster, screed or a ceiling warms up and cools down differently from the dry material around it, so on the screen a wet zone appears as a cooler (or sometimes warmer) patch with a recognisable outline. That outline tells us where to look and which way the water has travelled.
That is why the camera is never the last word. The suspicious spot is checked with a moisture meter, which gives a reading to compare with a dry spot on the same wall. The camera shows where to measure; the meter confirms that it is really wet.

One limit is worth knowing. The camera looks at surfaces of walls, floors and ceilings. It does not look inside a drain pipe. If the problem is a blocked or cracked drain, a different camera on a flexible cable is used — see CCTV drain survey.
Which leaks the camera helps with
- Bathrooms — a shower enclosure, a bath, or a pipe behind the tiles.
- Balconies and terraces — a failing waterproof layer under the finish.
- Wet underfloor heating — a damaged pipe inside the screed.
- Pipes inside walls and floors — hidden supply pipes you cannot get at.
- Water from a neighbour — working out where it really enters your flat.
- Damp and condensation — the cause of mould and wet patches that are not a leak at all.
Two of these have their own pages with a different focus: water from the flat above and balcony leaks. For a pipe buried in a yard or deep in a floor, a listening device is often the better tool — see acoustic leak detection.
How the visit goes
- You describe the problem. Where it is wet, since when, whether it grows. Photos sent by email help us to plan.
- We look at the area. We walk through the affected rooms and listen to what you have noticed.
- Thermal scan. We scan walls, floors and ceilings and look for the temperature differences that point to moisture.
- Moisture meter. We check each suspicious zone to confirm that it is wet and how wet.
- We tell you what we found. On site we show you the images and explain where the leak is and what should be repaired first.
A diagnosis in a standard flat usually takes 30 to 60 minutes. If the flat is large or the situation unclear, we say so when we agree the visit.
Tell us where it is wet and send a photo — we tell you the price and when we can come.
📞 +359 52 993 333How to prepare so the camera can do its job
- No special preparation is needed. Keep the walls and floors you are worried about reachable, without big furniture in front of them.
- If the flat has wet underfloor heating, switch it on at least two hours before we arrive. The warm pipes then show up clearly.
- Do not paint, plaster or seal the stain. Paint hides exactly the trace we need.
- Mark the edge of a stain with a pencil and note the date, so we can see whether it is growing.
- Photograph the stain from a distance and close up, and send the pictures by email if you are away.
The camera works in any weather. When a façade or a terrace is scanned from outside, we prefer overcast conditions or early hours, because strong sun can hide the differences.
What thermal camera leak detection costs
Thermal camera diagnostics cost €52 for the first flat and €26 for each further flat. If one device is not enough — for example a hidden pipe under pressure — we combine the camera with a listening device and a moisture meter. Combined diagnostics start from €55. The final figure depends on the floor area and on how complicated the situation is, and we tell you before we begin. Repairs are priced separately, after we know what the problem is. The general price list covers the rest.
If you own the flat but are not in Bulgaria
If you let the flat out or only use it in summer, you do not need to travel for this. Email us the address, a few photos of the stain and the name and phone number of whoever can open the door — a property manager, a neighbour, a tenant — and we arrange the visit with them. We tell you what we found, and you pay by bank transfer after the work. For a tenant or a block of flats, the pages on a leak in a rented flat and on property checks may also be useful.
Frequently asked questions
How does a thermal camera find a leak?
It shows the temperature of a surface. Water behind that surface makes a cooler or warmer patch with a clear outline, so we can see where the moisture is and which way it spreads. We then check the spot with a moisture meter. Nothing has to be opened up.
Is the camera on its own enough?
Often it is enough to find the area, but not always the exact pipe. That is why the spot is confirmed with a moisture meter, and why a listening device is added for pipes under pressure. Combined diagnostics are from €55.
How much does a thermal camera leak check cost?
€52 for the first flat and €26 for each further flat. Combined diagnostics, with a listening device and a moisture meter, are from €55. The final price depends on the floor area and how complicated the situation is, and we tell you before we start.
I have underfloor heating. Does it matter?
Yes, it helps. Switch the heating on at least two hours before we arrive, and the camera can follow the warm pipes across the floor. A leak in the screed then shows as a spot that behaves differently.
I'm not in Bulgaria. Can you still deal with it?
Yes. Send the address, photos and the contact of the person who can let us in, and we arrange the visit with them. We tell you what we found and agree what to repair first; you pay after the work by bank transfer, card or cash.
Can I contact you in English?
Yes — write to us in English by email at info@kanalvarna.com or through the form on this page, and we reply in English. The phone number is +359 52 993 333.
Hidden leak?
Tell us where it is wet and send a photo — we tell you the price and when we can come.
📞 +359 52 993 333or email info@kanalvarna.com — write in English and we reply in English.
Send us a message
Leave your name and a phone number with the country code. Add your email if you prefer a written reply — write in English and we reply in English. We confirm the price before any work starts.