Replacing water pipes in Varna: old galvanised steel swapped for PPR
Rusty water in the morning, weak flow, leaks that keep coming back? Old galvanised pipes in a Varna flat or house can be replaced with PPR, either the whole installation or only the worst section. We look at the job first and tell you the price before we start.
Our clients on video · all videos (in Bulgarian)
Replacing water pipes in Varna usually means swapping old galvanised steel for PPR (polypropylene) pipe joined by heat welding. The whole flat or house can be done, or only one section if that is all that is needed. Replacement with PPR is from €15 per metre, materials and labour; the total depends on the number of fittings, how much wall has to be opened and the access, so we tell you the price before we start, after you have described the job or sent photos. This is a planned job, listed with our other repairs on the plumber in Varna page. We work every day from 06:00 to 23:00. Call +359 52 993 333 or email info@kanalvarna.com — write to us in English and we reply in English. You pay after the work, in cash, by card or by bank transfer.
Updated November 2026When replacing water pipes makes sense
Most flats built in Varna before 1990 have galvanised steel water pipes. They were designed to last roughly 25 to 30 years, and after that they corrode from the inside, narrow with limescale and start to leak at the joints. You rarely see this happening, because the pipes sit in the walls and floors. You see the result.
- Rusty or yellowish water, especially first thing in the morning, is a clear sign that the steel is corroding.
- Weak flow in your flat only. If the neighbours have normal pressure, the narrowed pipes are probably in your installation. Before you decide, see whether a booster pump is really the answer — old pipes are a different problem.
- Repeated leaks. If you repair a pipe more than about once a year, replacing the whole installation usually costs less than paying for one local repair after another.
- Age. An installation from the 1980s or earlier is a question of when, not if.
- Banging or whistling pipes, which point to worn valves or narrowed sections.
If water is coming through a ceiling or wall right now, that is a different situation: see burst pipe first. This page is for the planned replacement.
Old pipes and new pipes: what you may find in the walls
| Pipe | Where you find it | What we advise |
|---|---|---|
| Galvanised steel | Flats and houses from the 1960s to the 1980s | Replace — corrodes, narrows, gives rusty water |
| Cast iron | Very old buildings, mostly for drains | Replace when joints loosen or the pipe cracks |
| Lead | Buildings from before about 1950 | Replace |
| PPR (polypropylene) | The usual choice for new work in Bulgaria | Does not corrode or scale up, heat-welded joints |
| PEX | Flexible pipe for hidden runs and wet underfloor heating | Good for hidden installations and new build with a manifold |
| Copper | Rare in Bulgarian homes, standard in much of Western Europe | Long-lived but costly, seldom used here |
For most flats we recommend PPR: it is the normal standard in Bulgaria, any plumber can repair it later, and the welded joint is stronger than the pipe itself. PEX is more flexible and runs without joints inside the wall, which removes the risk of a hidden leak at a joint, so it suits new build with a manifold system. In an older block, PPR is the practical choice.
The whole installation, or only one section?
A full replacement is not always necessary. Replacing only the worst section is sensible when you have one specific leak, when the budget is limited or when you are a tenant or are letting the flat and only need the problem solved. The new PPR is joined to the existing steel with transition fittings.
The trade-off is simple: a partial job leaves the old pipes next to the new ones, and they may fail next. If you are doing a major renovation anyway, it is better to replace everything from the water meter inwards so the walls are opened only once. If the drains are old too, the cast-iron waste pipes can be changed to PVC at the same time — one visit instead of two.
A hidden leak that you are not sure about is worth locating first, rather than opening walls on a guess: see leak detection in Varna.
Describe the flat or send photos by email — we tell you the price before we start and when we can come.
📞 +359 52 993 333How the replacement is done
- Look and plan. We see where the old pipes run, where the new ones will go and which points need water: taps, water heater, washing machine, dishwasher. You get the price before work begins.
- Preparation. Furniture and floors are protected and the water is turned off. In a block, the supply may need to be cut for the whole entrance for a few hours, so the neighbours are told in advance.
- Old pipes out, new pipes in. The old pipes are cut out. For hidden pipework, channels are cut in the wall only along the new route, and only once we know where the old pipes run. The new PPR is heat-welded, with fittings and valves.
- Pressure test. The installation is tested under pressure and every joint is checked before the channels are closed.
- Closing the channels. Walls can be closed by us or by a plasterer, as you prefer. We arrange temporary water for daily needs while the work is going on.
The work is done by the plumbers we work with; you deal only with us. For a standard flat, expect about one to two days; a two-bedroom flat ("three-room" in Bulgarian listings) takes two to three working days. If drains need replacing too, add about a day.
What the price depends on
Replacement with PPR is from €15 per metre, materials and labour. The total for a flat depends on the number of rooms, how many water points there are, how many fittings are needed, whether the pipes are in the wall or surface-mounted and how easy the access is. Materials are part of the price we quote, agreed with you before the work starts.
A description alone is rarely enough for a total. Send us a few photos by email — the bathroom, the kitchen, the area around the water meter — and say whether it is a flat in a block or a house. We then tell you the price. More on pricing in general is on our price list.
In a block of flats
Pipes inside your own flat are yours to replace. The vertical risers are shared, so replacing them is decided by the owners through the building manager or the owners' association, and it is a separate job: see riser pipe replacement.
If you are not in Bulgaria
Replacing pipes is a good job to plan from a distance, because it is not an emergency. Email us the address, photos of the bathroom and kitchen, the age of the building if you know it, and the name and phone number of the person who will open the door — a neighbour, a cleaner or a property manager. We agree the price and the days with you, you choose how to close the walls, and you can pay by bank transfer after the work.
The best time is between tenants, because there is no water in the flat for part of the day and some noise. Rusty water or low pressure on arrival is a good moment to ask for a quote; our property check is an option for a flat that has stood empty.
Frequently asked questions
How much does it cost to replace the water pipes in a flat?
Replacement with PPR is from €15 per metre, materials and labour. The total depends on the layout, the number of fittings and the access, so we tell you the price before we start, once you have described the job or sent photos. You pay after the work.
How long does it take, and will I have water?
A flat usually takes one to two days; a two-bedroom flat two to three working days. We arrange temporary water for daily needs during the work. In a block the supply may be shut off for the whole entrance for a few hours.
Do the walls have to be opened?
If the pipes are hidden in the walls, yes, but only along the route of the new pipes. With surface-mounted pipes, no. We do not open anything until we know where the old pipes run.
PPR or PEX?
For most flats we recommend PPR. PEX is flexible and suits hidden runs, wet underfloor heating and new build with a manifold. Both are fine; we explain which is right for your walls when we see the job.
Can I just change a section myself?
You can, but a joint made without the right tools can leak later, and your home insurance may not cover damage caused by a non-professional job. Questions about the pipes and fittings themselves go to the manufacturer, so keep the receipt.
I'm not in Bulgaria. Can you still deal with it?
Yes. Send photos and the address by email, name the person who will open the door, and we agree the price and the days with you. You can pay by bank transfer after the work.
Can I contact you in English?
Yes — write to us in English by email at info@kanalvarna.com or through the form on this page, and we reply in English. The phone number is +359 52 993 333.
Thinking of new pipes?
Describe the flat or send photos by email — we tell you the price before we start and when we can come.
📞 +359 52 993 333or email info@kanalvarna.com — write in English and we reply in English.
Send us a message
Leave your name and a phone number with the country code. Add your email if you prefer a written reply — write in English and we reply in English. We confirm the price before any work starts.