Kanal VarnaDrains • Leaks • Thermal imaging • Plumbing
Water running from a chrome kitchen tap into a clear glass

Water testing in Varna: tap, well or borehole water, read against the limit

Limescale in the water heater, a well that runs cloudy after rain, or a borehole you would like to drink from. We test the water at your tap or pump, show you the numbers while we are there and tell you which of them need a laboratory.

Our clients on video · all videos (in Bulgarian)

Quick testAbout half an hour; you see the numbers on site
BacteriaOnly an accredited laboratory can show them
ReportEach value beside the limit; not an official document
PriceBy phone, after you tell us the source and what the water is for
1000+ clients served 30+ years in the trade Price agreed before we start 06:00–23:00 every day
In short

Water testing in Varna has two parts. At the property we measure hardness, pH, nitrates, iron, residual chlorine, conductivity and turbidity at your tap, well or borehole and give you a report with each value beside the Bulgarian drinking-water limit. Bacteria such as E. coli, and a full chemical analysis, cannot be seen with a quick test: they go to an accredited laboratory, at its price, which we tell you first. We are not a laboratory and our report is not an official test report. This page is part of our home testing service. Call +359 52 993 333 or e-mail info@kanalvarna.com - write to us in English and we reply in English.

Updated November 2026

Water testing in Varna: a quick test and a laboratory sample

Start with what the water is for. Drinking from a well, mixing baby formula, protecting a water heater and a washing machine, or buying a house with a borehole all call for different readings. So the work comes in two parts, which you can order together or separately.

  • A quick test at the property. Hardness, pH, nitrates, iron, residual chlorine, conductivity (the dissolved salts) and turbidity, taken from your tap, well or borehole. pH and conductivity are read by an electronic meter, the rest with reagent tests. You see the numbers while we are there.
  • A sample for a laboratory. Bacteria (E. coli, enterococci, coliforms) and the fuller chemistry go to an accredited laboratory in Varna. The sample is taken in the laboratory's own containers, by its rules.
A report, not a test report. After the quick test you get a report with the measured values next to the limit. It shows where the water stands, but it is not an official document. We are not a laboratory and we do not issue test reports. For the Regional Health Inspectorate (RZI), for a guest house with visitors, for a sale or a dispute, the document comes from an accredited laboratory, which we arrange.
A rack of test tubes holding coloured water samples
Coloured reagent samples: the quick test gives numbers you can read at the tap.

When it makes sense to test the water, and what to test

Reasons to test the water and what we suggest for each
ReasonQuick test at the propertyLaboratory
You drink water from a well or boreholeNitrates, iron, hardness, pH, turbidity as a first guideYes: E. coli, enterococci, coliforms and chemistry
Baby formula from your own sourceNitrates, for a first numberYes: microbiology, nitrates and nitrites
Buying a property with a well or boreholeYes, it shows whether you will need a filter or a softenerAdvisable if the water will be drunk
After a flood or a pump repairTurbidity and residual chlorine after disinfectionYes: microbiology, once the well is cleaned and pumped
Mains water with limescale, taste or colourHardness, chlorine, iron, conductivityUsually not needed
Choosing a softener or a filterHardness, iron and pH give the numbers for the choiceNot, unless the water is from your own source

After a flood, or if something has fallen into a well, the order is cleaning and disinfection first and a sample afterwards. A sample taken before that only tells you what you already know. Our page on well cleaning explains the cleaning, and a new or repaired borehole is pumped until the water runs clear before it is worth sampling; see borehole drilling.

If you are buying a house with a well, the water is only one of the things to check. Leaks and the state of the pipes belong to a survey before buying.

The limits we compare the numbers with, and hardness in Varna

We read your result against the Bulgarian drinking-water limits. Those rules apply to tap water; for a private well they are the yardstick you measure against, not a duty placed on you, unless the water is used by guests in a business such as a guest house. The ones people ask about most:

Common parameters, the Bulgarian limit and where each is measured
ParameterLimitWhere it is measured
E. coli and enterococci0 in 100 mlLaboratory only
Nitrates50 mg/lAt the property and in a laboratory
Iron0.2 mg/lAt the property and in a laboratory
pH6.5 to 9.5At the property
Total hardnessup to 12 mg-eq/lAt the property
Conductivity2000 µS/cmAt the property

Varna water is hard, as limescale in a kettle or a water heater shows. How hard it is at your tap depends on the source feeding your neighbourhood, so we measure it rather than quote an average. ViK Varna, the water company, publishes its own figures.

A number is a fact, not a verdict. Beside each value we write the limit and what usually lies behind a deviation. What a value means for health is a question for a doctor and for the RZI, not for us.

Water testing through the RZI or a laboratory: who does what

Many people search for an official water analysis. That document comes only from an accredited laboratory. We are not a laboratory. Our part comes before and around it:

  • we tell you which parameters to order, so that you do not pay for a full analysis when three numbers will do, or skip the bacteria when the water will be drunk;
  • we arrange the laboratory and tell you its price in advance;
  • when the laboratory's document arrives, we explain the numbers and what usually follows: a filter, a cleaned well, or nothing.

You can also take the sample yourself, following the laboratory's instructions, and save our visit. Accredited laboratories in Varna accept samples from private people; the laboratory of the water company is one example. It makes sense to call us when you also want the quick test, when the property is a villa or an inherited house that you rarely reach, or when you do not want to risk the sample spoiling on the way.

Tell us where the water comes from and what you use it for. By phone we say which parameters to test and what the laboratory will charge.

📞 +359 52 993 333

How the visit goes

  1. Tell us about the water. Say where it comes from, what you use it for and what you notice. From that we choose the parameters and tell you the laboratory's price.
  2. The right tap. The sample comes from the tap you drink from, or the first tap after the borehole pump, not through a hose, a filter or a softener, unless those are what we are checking. The water runs for a few minutes first, and on a well after the pump has been working.
  3. The quick test. Done on the same water while we are there, and you see the figures.
  4. The laboratory. The sample goes to the laboratory in a cool bag. The result comes after a few working days; the laboratory gives the exact timescale.

The visit with the quick test and a sample takes about an hour, and the quick test alone about half an hour. Samples can only be handed in on the days and at the hours the laboratory accepts them, so that day is agreed in advance. For the quick test alone we come by arrangement every day between 06:00 and 23:00.

An old stone well with a lid in the yard of a village house
A well in the yard: the sample is taken after the pump has run, not from standing water.

If you live abroad or let the property out

If you are not in Bulgaria, send us the address, where the water comes from and what worries you at info@kanalvarna.com - write to us in English and we reply in English. Tell us who will let us in: a tenant, a neighbour, the building manager or whoever holds the keys. You do not need us to set a dishwasher (a hardness strip from a shop will do) or for mains water with no taste, colour or smell, which ViK Varna and the RZI monitor.

A hotel or guest house with a water heater to check should also look at legionella testing, which is a separate service.

After the result: filter, softener or a cleaned well

What a result usually leads to, and who does it
ResultWhat usually helpsWho does it
Hard water, limescaleA filter before the water heater, or a softener for the whole houseA plumber; see water heater repair
Iron, rusty stainsOn a well or borehole, an iron filter; on mains water, a check of the pipes in the buildingA plumber
Turbidity or sand after rainA mechanical filter; on a well, cleaning and a sealed topSee well cleaning
E. coli or enterococciFind how it gets in, clean and disinfect, then take a new sampleWe arrange the cleaning; the laboratory does the new sample
Everything within the limitNothing; keep the report and repeat the test if the water changes-

We recommend no brand. We tell you what kind of filter or softener fits the numbers, and a plumber does the pipework. If the water is meant for baby food, the question goes to the paediatrician with the laboratory's document in hand; we explain the numbers but give no health advice.

What the price of water testing depends on

The price has two parts: our visit with the quick test, and the analysis at the laboratory. We give you ours by phone before we come, once you have said what the source is and what the water is for. The laboratory charges by the number of parameters: microbiology alone costs less than a full chemical analysis. We tell you its price before the sample is taken. We issue an invoice, and you can pay by cash, card or bank transfer.

Frequently asked questions

Does the quick test show bacteria in my well?

No. E. coli, enterococci and coliforms cannot be seen with an instrument on site or with the eye, and clear water does not mean they are absent. Only a laboratory analysis shows them, so for water that will be drunk we always suggest a laboratory sample as well.

Can I have my water tested by the RZI?

The RZI (the Regional Health Inspectorate) watches the quality of mains water; the official test report comes from an accredited laboratory. You can take a sample yourself by the laboratory's instructions, or we arrange the laboratory so that you do not have to deal with sterile bottles, deadlines and a cool bag. More about the service is on our home testing page.

How long does it take?

The quick test takes about half an hour and you see the numbers while we are there. The laboratory result comes after a few working days, since bacteria have to be cultured; the laboratory gives the exact timescale when you order.

Can I use well water for baby food?

That is decided from the laboratory's document, not from the quick test, and the question goes to a paediatrician. We look first at microbiology and nitrates: the limit for nitrates is 50 mg/l and for E. coli and enterococci 0 in 100 ml. We explain the numbers but do not give health advice.

I live abroad and let the flat out. Can you deal with it?

Yes, if someone can let us in: a tenant, a neighbour, the building manager or whoever has the keys. E-mail the address and what you have noticed to info@kanalvarna.com; by phone we tell you whether and when we can come.

Want to know what is in your water?

Tell us where the water comes from and what you use it for. By phone we say which parameters to test and what the laboratory will charge.

📞 +359 52 993 333

or email info@kanalvarna.com — write in English and we reply in English.

Send us a message

Leave your name and a phone number with the country code. Add your email if you prefer a written reply — write in English and we reply in English. We confirm the price before any work starts.

📞